Planmeca ProX™
Versatile intraoral X-ray unit for veterinary dental radiology

The Planmeca ProX^™ intraoral X-ray unit is the perfect choice for 2D veterinary intraoral imaging. With a precise positioning guide and a straightforward imaging process, the Planmeca ProX provides the adjustable settings to capture high-resolution images. The flexibility of installation options and practical design make dental imaging easy to bring to any veterinary clinic. Streamline the imaging process with the Planmeca ProX X-ray and fully integrated Planmeca ProSensor^® HD.

Exceptionally versatile imaging

With flexible installation options for wall, ceiling, and floor mounts as well as mobile, the Planmeca ProX is suitable for every veterinary clinic. The steady arm and lightweight tube head ensure precise and drift-free positioning for consistent and accurate image capture the first time and every time.

intraoral imaging

Smart veterinary dental imaging settings

Planmeca ProX is pre-programmed with exposure settings for both large and small animals. Select the image receptor to automatically adapt the pre-programmed settings for digital sensor, phosphor plate, or film. Together with the intelligent Planmeca Romexis® Vet software, Planmeca ProX guarantees a smooth workflow.

Rapid image to diagnosis with digital sensors

For the most agile veterinary dental imaging experience, use the Planmeca ProX together with the Planmeca ProSensor HD digital sensor system. With a high-resolution image available seconds after exposure, the time needed for diagnosis is significantly reduced. Available in three sizes - 0, 1, and 2 - for ease of positioning.

Planmeca ProSensor sizes

Planmeca ProX™ technical specifications

Technical data

Generator	Constant potential, microprocessor controlled, operating frequency 66 kHz
X-ray tube	Toshiba D-041SB
Focal spot size	0.4 mm according to IEC 60336
Cone diameter	60 mm (2.36 in.) Rectangular 33 x 43 mm (1.30 x 1.69 in.)
Max. symmetrical radiation field	Ø60 mm at SSD 200 mm Ø60 mm at SSD 300 mm according to IEC 806
Total filtration	min. 2.5 mm Al equivalent at 70 kV according to IEC 60522
Inherent filtration	1 mm Al equivalent at 70 kV according to IEC 60522
Anode voltage	60, 63, 66, 70 kV
Anode current	8, 7, 6, 5, 4, 3, 2 mA ±(5% + 0.2 mA)
Exposure times	0.01–2 sec., 24 steps
SSD (Source-Skin Distance) Standard/Long	200 mm (8 in.)/300 mm (12 in.)
Mains voltage	100 V~/110-115 V~/220-240 V~, 50/60 Hz
Duty cycle	1:13.5
Electrical classification	Class I Type B
Weight	total 29 kg (64 lbs) tube head with standard cone 4.2 kg (9.3 lbs) tube head with long cone 4.5 kg (10 lbs)
Color	White (RAL 9016)